All Access Equipment
CMC Lifts
The CMC 42F
The smallest, and most user-friendly narrow-access lift
Introducing the new 2020 CMC 42F
The CMC 42F is the smallest, most compact, and most affordable model in our CMC Tracked Aerial Lift series. This narrow access lift features up to 42' 7" of working height, up to 27' 10" of side reach, and weighs and extremely light weight 3,483 lbs. All of this comes in a compact package of just 31" wide, giving this lift the capability to enter virtually any standard door and access tight areas where other lifts cannot. The CMC 42F features a very user-friendly hydraulic control station on both the ground and the basket. These fast-proportional hydraulic controls make it very easy and intuitive for the operator to learn and get work done immediately. The CMC 42F comes equipped standard with a Honda GX390 gas engine as well as the 120V 20A plug-in electric motor. The plug-in electric motor allows you to operate quieter and without engine fumes when working indoors.
Standard Features:
- 42' 7" working height
- Up to 27' 10" lateral outreach
- 31" wide transport mode (will enter virtually any doorway)
- 15" ground clearance with tracks
- Fixed two-man aluminum basket (43" x 27" x 55")
- Proportional travel mode with wired remote control
- Outrigger piston protective covers
- LED display for error code detection
- Honda GX390 gas engine
- High-pressure air and water hose in the basekt
- 120V Plug-in electric motor
- 12V Electrical socket in the basket
- Fast proportional hydraulic controls
- 12 month warranty
Specifications
- Jib movement 90°
- Turret rotation +/- 356° (non-continuous)
- Basket rotation +/- 90° (*optional)
- Maximum slope to stabilize 16° (29%)
- Height/Width track adjustment (*optional) 31" - 46"
- Maximum slope approach angle 12-25° (21%-46%)
- Gradeability (maximum climbing angle) 30° (58%)
- Lightweight 3,483 lbs
- Travel speed 1.5 MPH
The CMC 50F
Mid-Level F-Series Compact Access Lift
Introducing the new 2020 CMC 50F
The CMC 50F is the mid-level F-Series friendly compact lift. This narrow access lift features up to 50' of working height, up to 26' 11" of side reach, and weighs and extremely light weight 5,180 lbs. All of this comes in a compact package of just 31" wide, giving this lift the capability to enter virtually any standard door and access tight areas where other lifts cannot. The CMC 50F features a very user-friendly hydraulic control station on both the ground and the basket. These fast-proportional hydraulic controls make it very easy and intuitive for the operator to learn and get work done immediately. The CMC 50F comes equipped with a fixed two-man aluminum basket, a standard with a Honda GX390 gas engine as well as the 120V 20A plug-in electric motor. The plug-in electric motor allows you to operate quieter and without engine fumes when working indoors.
Standard Features:
- 50' working height
- Up to 26' 11" lateral outreach
- 31" wide transport mode (will enter virtually any doorway)
- 15" ground clearance with tracks
- Fixed two-man aluminum basket (43" x 27" x 55")
- Proportional travel mode with wired remote control
- Outrigger piston protective covers
- LED display for error code detection
- Honda GX390 gas engine
- High-pressure air and water hose in the basekt
- 120V Plug-in electric motor
- 12V Electrical socket in the basket
- Fast proportional hydraulic controls
- 12 month warranty
Specification:
- Jib movement 90°
- Turret rotation +/- 356° (non-continuous)
- Basket rotation +/- 90° (*optional)
- Maximum slope to stabilize 17° (31%)
- Height/Width track adjustment (*optional) 31" - 46"
- Maximum slope approach angle 28° (53%)
- Gradeability (maximum climbing angle) 37° (75%)
- Lightweight 5,180 lbs
- Travel speed 1.5 MPH
The CMC 60F
Our Tallest F-Series Compact Access Lift
Introducing the new 2020 CMC 60F
The CMC 60F is the tallest F-Series friendly compact lift. This narrow access lift features up to 60' of working height, up to 30' 10" of side reach, and weighs and extremely light weight 5,269 lbs. All of this comes in a compact package of just 31" wide, giving this lift the capability to enter virtually any standard door and access tight areas where other lifts cannot. The CMC 60F features a very user-friendly hydraulic control station on both the ground and the basket. These fast-proportional hydraulic controls make it very easy and intuitive for the operator to learn and get work done immediately. The CMC 60F comes equipped with a fixed two-man aluminum basket, a standard with a Honda GX390 gas engine as well as the 120V 20A plug-in electric motor. The plug-in electric motor allows you to operate quieter and without engine fumes when working indoors..
Standard Features:
- 60' working height
- Up to 30' 10" lateral outreach
- 31" wide transport mode (will enter virtually any doorway)
- 15" ground clearance with tracks
- Fixed two-man aluminum basket (43" x 27" x 55")
- Proportional travel mode with wired remote control
- Outrigger piston protective covers
- LED display for error code detection
- Honda GX390 gas engine
- High-pressure air and water hose in the basekt
- 120V Plug-in electric motor
- 12V Electrical socket in the basket
- Fast proportional hydraulic controls
- 12 month warranty
Specification:
- Jib movement 90°
- Turret rotation +/- 356° (non-continuous)
- Basket rotation +/- 90° (*optional)
- Maximum slope to stabilize 17° (31%)
- Height/Width track adjustment (*optional) 31" - 46"
- Maximum slope approach angle 28° (53%)
- Gradeability (maximum climbing angle) 37° (75%)
- Lightweight 5,269 lbs
- Travel speed 1.5 MPH
The CMC 50L
Nimble. Compact. Convenient.
The Most Compact 50 Foot Lift, Ever.
The 50L is the shortest 50 foot lift in the world in this size class at 11' 4". This lift weighs in at only 4,310 lbs, yet it is a very rugged and stable lift. It can be used both outdoors and indoors, as the standard format comes equipped with a 13 HP Honda gas engine and a 120V electric hydraulic power pack. The CMC 50L is an impressive lift with extreme capabilities. It is a phenomenal facility maintenance lift because it grants easy access to windows, gutters, lights, and much more.
Standard Features:
- 50 ft working height
- 23 ft lateral outreach
- Most compact 50 ft lift: 32" wide and 11'4" long
- Only 4,310 lbs
- Fast boom operation
- Wired remote control
- Simple all-hydraulic controls
- 441 lb basket capacity
Specifications:
- Jib movement 90°
- Turret rotation +/- 356°
- Basket rotation +/- 90°
- Maximum slope to stabilize 7° (12%)
- Maximum slope approach angle 13° (23%)
- Gradeability (maximum climbing angle) 17° (30%)
- Lightweight 4,310 lbs
- Travel speed 0-1.5 mph
The CMC 60L
Nimble & Compact, With The Extra Reach.
60 Foot Light Duty Lift
This new 60 foot light duty lift by CMC is the beginning of a new and advanced generation of narrow access lifts. It has the same capabilities of the 50L, but with 60 ft work reach. For new operators whom have never operated similar equipment before - it is intuitive, easy to run and understand, but yet has the speed and durability that professionals expect. This lift has limited outdoor self-leveling abilities (up to 10"/250mm), but works very well on level ground or indoor applications. This new and innovative lift is ideal for indoor/outdoor facility maintenance work such as glass cleaning, changing light bulbs, atrium work, and etc.
Standard Features:
- 62 ft working height
- 29 ft lateral outreach
- Most compact 60 ft lift: 30" wide and 14'10" long
- Only 5,732 lbs
- Fast boom operation
- Wired remote control
- Simple all-hydraulic controls
- 507 lb basket capacity
Specification:
- Jib movement 90°
- Turret rotation +/- 359°
- Maximum slope to stabilize 5° (9%)
- Maximum slope approach angle 16° (29%)
- Gradeability (maximum climbing angle) 20° (36%)
- Lightweight 5,930 lbs
- Travel speed 0-1.5 mph
The CMC 60HD+ Arbor Pro
The Best 60 Foot Lift For Tree Care
The 60HD+ Arbor Pro: The Best 60 Foot Tree Care Tracked Lift
The 60HD+ Arbor Pro tracked lift is designed with one of the roughest industries in mind - the tree industry. This heavy duty but simple 60 foot tree care lift is ideal for outdoor use. With 62 feet of working height and up to 38 feet of side reach the 60HD Arbor Pro has an extraordinary working advantage. There is simply no other lift in the market that is as high quality and can compare with these abilities. The 60 foot lift is easy to operate and it has extreme leveling capability of nearly 3 feet. The 60HD+ Arbor Pro is built head to toe with heavy duty and durable components. This lift operates with impressive fast and smooth boom speeds. Equipped with simple, all hydraulic toggle controls, this machine is easy to operate. It comes standard with a single-man aluminum basket, however it can be substituted for either a single-man fiberglass basket or a two-man fixed aluminum basket. At only 34.5" wide, this tracked aerial lift has the ability to enter through any 36" gate. It also has hydraulically adjustable tracks from 34" to 50" for stability on rough terrain. A powerful and large track drive system combined with heavy duty rubber tracks allows this lift to travel on the most extreme routes with ease. This compact lift comes with simple hydraulic automatic outrigger leveling, as well as radio remote controls. Not to mention, the 60HD+ Arbor Pro is reasonably priced, making this tracked lift clearly the best all-around value for tree care industry.
Standard Features:
- 62 ft working height
- Up to 38 ft lateral outreach
- 35" wide (can enter virtually any doorway)
- Single-man aluminum basket
- 485 lb basket capacity
- Multi-setup outriggers: wide or narrow
- Simple all hydraulic controls
- Single-handed operation
- Designed specifically for tree care
- Radio Remote Controls
- 12V Battery backup
- Automatic chassis leveling
Specification:
- Turret rotation +/- 710°
- Maximum slope to stabilize 20° (36%)
- Maximum slope approach angle 30° (57%)
- Gradeability (maximum climbing angle) 17° (30%)
- Lightweight 6,500 lbs
- Travel speed 0-1.5 mph (three speeds)
The CMC 72HD+ Arbor Pro
The 72 ft tracked lift designed specifically for tree care in America.
The Most Compact 50 Foot Lift, Ever.
The 50L is the shortest 50 foot lift in the world in this size class at 11' 4". This lift weighs in at only 4,310 lbs, yet it is a very rugged and stable lift. It can be used both outdoors and indoors, as the standard format comes equipped with a 13 HP Honda gas engine and a 120V electric hydraulic power pack. The CMC 50L is an impressive lift with extreme capabilities. It is a phenomenal facility maintenance lift because it grants easy access to windows, gutters, lights, and much more.
Standard Features:
- 72 ft working height
- Up to 41 ft lateral outreach
- 35" wide transport mode (will enter virtually any doorway)
- Self-load/unload and operate as a rear mount forestry bucket truck
- Single-man aluminum bucket with quick connect bracket (24" x 24" x 39")
- Radio remote controls
- Set of 4 sliding outrigger pads
- Outrigger piston protective covers
- Vertically/horizontally adjustable black rubber tracks
- Kubota model Z602-E3B, 17 HP diesel engine
- Storage box with on-board battery charger for radio remote
- 12V Emergency battery let down system
Specification:
- Jib movement 90°
- Turret rotation +/- 710°
- Basket rotation +/- 90°
- Maximum slope to stabilize 15° (27%)
- Maximum slope approach angle 31° (57%)
- Gradeability (maximum climbing angle) 17° (30%)*
- Lightweight 6,614 lbs
- Travel speed 1.5 mph
The CMC 75L
Ultra-Versatile 75 Ft Tracked Lift
Welcome to the future. Presenting the NEW CMC 75L.
The new CMC 75L is the latest and most advanced CMC lift specifically developed from the ground up for the rental industry, combining the many aspects and maneuverability of CMC’s smaller compact CMC lifts with the features of the larger CMC lifts, into a practical and efficient new model.
The new CMC 75L is the culmination of decades of brilliant CMC engineering.
Standard Features:
- 75 ft working height
- Up to 40' 8" lateral outreach
- 35" wide transport mode (will enter virtually any doorway)
- Single-man aluminum basket with quick connect bracket (24" x 24" x 39")
- Radio remote controls
- Set of 4 sliding outrigger pads
- Outrigger piston protective covers
- Horizontally adjustable black rubber tracks
- Kubota model Z602-E3B, 17 HP diesel engine
- Storage box with on-board battery charger for radio remote
- 12V Emergency battery let down system
Specifications:
- Jib movement 90°
- Turret rotation +/- 710°
- Basket rotation +/- 90°
- Maximum slope to stabilize 8° (14%)
- Maximum slope approach angle 16° (29%)
- Gradeability (maximum climbing angle) 17° (30%)*
- Lightweight 7,055 lbs
- Travel speed up to 1.5 mph
The CMC 83HD+ Arbor Pro
The only tracked lift designed from the ground up for tree work, for arborists by arborists.
The CMC 83HD+ Arbor Pro Advantage:
The new CMC 83HD+ Arbor Pro is the only compact tracked mini lift designed from the ground up, specifically for the tree care industry.
Most competitor mini lifts were designed for interior use only. They are built extremely light and use light duty components.
83= 83 ft working height - HD= Heavy duty components for severe duty service
+ (plus) = Comes equipped with many standard features to increase your productivity and simplify operation: Simple two joystick basket control station, redundant radio remote controls for ground operation, smooth and faster proportional hydraulic controls, automatic outrigger leveling, automatic boom park feature, automatic end of stroke piston speed slow down, automatic anti-collision system, adjustable on the fly track height and width adjustment (up to 14" ground clearance), stair climbing feature, wall (43") outrigger set up capability, multiple outrigger positions, automatic outrigger lock out.
Arbor Pro: Faster boom operational speeds, better hill climbing ability, available hydraulic tool option, available one-man fiberglass basket option, more redundant safety devices.
The ruggedized CMC 83HD+ Arbor Pro combines superior engineering with advanced control technology, designed for severe duty. This lift combines more standard versatile features than any other lift in this class in the world. It is also one of the safest lifts you can operate and feel comfortable, as it comes equipped standard with more redundant safety devices to provide a safer work environment.
Standard Features:
- 83' working height
- Up to 46' of lateral side reach
- Proportional controls allow up to 3 functions at once at full speed
- Two articulating and telescopic booms
- Lower boom with one telescopic extension
- Upper boom with two telescopic extensions
- Hydraulic hoses and control cables inside booms for complete protection, with easy service access
- Telescoping boom sections with hydraulic cylinders and leaf drive chains
Specifications:
- Jib movement 90°
- Turret rotation +/- 400°
- Basket rotation +/- 90°
- Maximum slope to stabilize 19° (34%)
- Maximum slope approach angle 14° (25%)
- Gradeability (maximum climbing angle) 19° (34%)*
- Lightweight 8,500 lbs
- Travel speed 0-3 mph (three speeds)
The CMC 83HD+ Atrium
The Most Versatile Lift Ever.
The CMC 83HD+ Atrium
The new CMC 83HD+ Atrium is the tracked aerial lift of the future. It is the most versatile tracked lift to date that can access just about any location. Perfect for facility maintenance, such as atrium work, glass cleaning, electrical, painting, and much more. With 83’ of working height and up to 46’ of lateral outreach, this fast & efficient aerial lift can still easily track through narrow hallways and enter single 36” doors.
With a full Lithium Ion Battery option, operate fast and quietly for a full shift without having to worry about plug-in requirements diesel fumes, outdated battery acids, or having to recharge.
With 2-joystick controls, the 83HD+ Atrium features very user-friendly controls. The controls are smooth, fast, & proportional, making this lift very easy to learn and operate, meaning more return on investment.
Take a look at our photos, videos, unique features, standard features and optional items and contact us with any questions!
Interested in this lift for tree care? Check out the Arbor Pro Version.
83 = 83 Feet of working height
HD = Heavy Duty
+(plus) = Radio remote control system is included
The Atrium model is equipped standard with: radio remote controls, two-man aluminum basket with quick-connect bracket (24" D x 48" W x 43" H), MOBA 2 joystick basket control station, movable jib. rotatable basket, automatic chassis self-leveling, outrigger piston protective covers, set of 4 sliding outrigger pads, vertically/horizontally adjustable white non-marking rubber tracks, Kubota model D-902 21.6 HP diesel engine, storage box with on-board battery charger for radio remote, 120V plug-in electric motor, 120V electricity outlet in basket, and high pressure air/water outlet in basket.
Standard Features:
- 83 ft working height
- Up to 46 ft lateral outreach
- 43 ft up and over reach
- 35" wide transport mode (will enter virtually any doorway)
- 15" ground clearance with tracks
- Turbo Hydraulics: operate 3 boom functions simultaneously
- Automatic boom park
- Self-load/unload and operate as a rear mount forestry bucket truck
- Two-man aluminum basket 507 lb capacity
- Radio remote controls
- Set of 4 sliding outrigger pads
- Outrigger piston protective covers
- Vertically/horizontally adjustable black rubber tracks
- Kubota model D-902, 21.6 HP diesel engine
- Hardwired MOBA basket control station
- Storage box with on-board battery charger for radio remote
- 12V Emergency battery let down system
Specifications:
- Jib movement 90°
- Turret rotation +/- 400°
- Basket rotation +/- 90°
- Maximum slope to stabilize 19° (34%)
- Maximum slope approach angle 14° (25%)
- Gradeability (maximum climbing angle) 19° (34%)*
- Lightweight 8,500 lbs
- Travel speed 0-3 mph (three speeds)
The CMC 92HD+ Arbor Pro
The BEST just got BETTER.
The CMC 92HD+ Arbor Pro Advantage:
The new CMC 92HD+ Arbor Pro is the only compact tracked lift designed from the ground up, specifically for the tree care industry.
Most competitor mini lifts were designed for interior use only. They are built extremely light and use light duty components.
92 = 92 ft working height
HD = Heavy duty components for severe duty service
+ (plus) = Comes equipped with many standard features to increase your productivity and simplify operation: Simple two joystick basket control station, redundant radio remote controls for ground operation, smooth and faster proportional hydraulic controls, automatic outrigger leveling, automatic boom park feature, automatic end of stroke piston speed slow down, automatic anti-collision system, adjustable on the fly track height and width adjustment (up to 14" ground clearance), stair climbing feature, wall (43") outrigger set up capability, multiple outrigger positions, automatic outrigger lock out.
Arbor Pro: Faster boom operational speeds, better hill climbing ability, available hydraulic tool option, available one-man fiberglass basket option, more redundant safety devices.
The ruggedized CMC 92HD+ Arbor Pro combines superior engineering with advanced control technology, designed for severe duty. This lift combines more standard versatile features than any other lift in this class in the world. It is also one of the safest lifts you can operate and feel comfortable, as it comes equipped standard with more redundant safety devices to provide a safer work environment.
Standard Features:
- 92 ft working height
- Up to 46 ft lateral outreach
- 49 ft up and over reach
- 35" wide transport mode (will enter virtually any doorway)
- 15" ground clearance with tracks
- Turbo Hydraulics: operate 3 boom functions simultaneously
- Automatic boom park
- Self-load/unload and operate as a rear mount forestry bucket truck
- Single-man fiberglass bucket with quick connect bracket (24" x 24" x 39")
- Radio remote controls
- Set of 4 sliding outrigger pads
- Outrigger piston protective covers
- Vertically/horizontally adjustable black rubber tracks
- Kubota model D-902, 21.6 HP diesel engine
- Hardwired MOBA basket control station
- Storage box with on-board battery charger for radio remote
- 12V Emergency battery let down system
Specifications:
- Total length (two-man aluminum basket) 22' 4"
- Total length (single-man fiberglass basket) 23' 1"
- Length without basket 20'
- 0 Jib movement 90°
- Turret rotation +/400°
- Basket rotation +/90°
- Maximum slope to stabilize 19° (34%)
- Maximum slope approach angle 14° (25%)
- Gradeability (maximum climbing angle) 19° (34%)*
- Lightweight 9,200 lbs
- Travel speed 0-3 mph (three speeds)
The CMC 105HD+
The Ultimate Tree Care Lift For Extreme Heights
The 105HD+: The Ultimate 100 Foot Tracked Lift For Tree Care.
This 100 foot tracked lift is is the ultimate solution for tree care due to its 105 ft working height and 52 ft side reach. With the extreme reach capabilities, the 105HD+ model bristles with the most advanced aerial lift technology innovation providing a new dimension of speed by allowing three functions at once at full speed, articulating, telescoping, rotating turret, moving jib and rotating basket. In addition, the agility and maneuverability of this lift is unparalleled by any other lift in the world.
To truly get a feel for the lift, you must ride the lift to really appreciate the giant leap forward in technology that this lift provides against any existing technology. Being meticulously engineered to overcome the faults of other lifts, the first thing you immediately notice on this lift is the rugged and secure ride, as well as the boom speeds, precision, and smoothness of the controls. Our new advanced hydraulic technology increase reliability. For example, a new "hydraulic turbo feature", allows for even faster boom operation.
In conclusion, the CMC 105HD+ is a lift that everyone will appreciate, even our competitors.
Standard Features:
- 105 ft working height
- Up to 52 ft lateral outreach
- 10 ft below grade capability
- 485 lb basket capacity
- 15" of ground clearance with tracks
- Turbo Hydraulics: operate 3 fast boom functions simultaneously
- Special winterized features for cold starts
- Radio remote controls
- +/-90° Rotatable basket
- Hybrid power
- Only 16,050 lbs
Specifications:
- Jib movement 135°
- Basket rotation +/- 90°
- Turret rotation +/- 400°
- Total width (tracks in) 59.5"
- Maximum slope to stabilize 8.3° (15%)
- Maximum slope approach angle 16° (29%)
- Gradeability (maximum climbing angle) 19° (34%)*
- Weight: 16,050 lbs
- Travel speed 0-1.5 mph (three speeds)
- 485 lb basket capacity
The CMC 135HD
Break new heights.
CMC 135HD - Maximize Your Reach.
The self-propelled tracked lift 135HD by CMC reaches the maximum height of 135 ft and 52'4" ft of working outreach. This lift also has a unique basket capacity of 441 lbs and minimum overall dimensions of 13 ft outrigger footprint stabilization. It has a telescopic configuration of 6 extensions and a longer jib. The CMC 135HD can be mounted on a 4-wheel drive or on a set of rubber tracks. These are both equally maneuverable systems with a wired remote control. It is equipped with articulated outriggers that allow extremely compact dimensions in the transport position and dual fuel (diesel and silenced electric pump three-phase 380v). The CMC 135HD also has control system that allows remote diagnostics for on-site troubleshooting and service.
Standard Features:
- 135 ft working height
- Up to 62 ft lateral outreach
- 82" total width
- 12" ground clearance with tracks
- Automatic outrigger leveling
- Kubota model Z-602, 14.5 HP diesel engine
- 90° Independently moveable jib
- Proportional basket controls
- 441 lbs basket capacity
- 2-Man aluminum basket
- Fast boom operation
- Single-handed operation
- Hybrid 120V Plug-in electric motor
- 4 Sliding outrigger pads
Specifications:
- Jib movement 90°
- Turret rotation 360° continuous
- Maximum slope to stabilize 3°
- Maximum slope approach angle 7° (12%)
- Gradeability (maximum climbing angle) (18%)*
- Lightweight 29,542 lbs
- Travel speed 0-1.5 mph